Table of Contents
Advertisement
DIGICAT 500i/550i, Functional Checks
94
6. Connection mode check
With the Transmitter operating in the 33 kHz Induction mode, plug in the transmitter's cable
set. The pulsing audio tone should change and the connection/induction LED change to indi-
cate that the output has automatically changed over to the connection mode.
Connect the transmitter's cable set together, the output audio tone should change from
pulsed to continuous and the Level meter display should read maximum.
Turn on the Locator set to 33 kHz mode and place it over one of the output connection
cables.
The Locator should detect and indicate with both audio and visual indicators.
Change the Transmitter and Locator modes to 8 kHz and repeat. The speed of the audio
pulsed output of the Transmitter should slow down.
If any of these tests give no response or a significantly different response from
normal, the Transmitter should be returned for service.
Advertisement
Table of Contents
