Table of Contents
Advertisement
DIGICAT 500i/550i, How to Use the Locator
Detecting direction of
the service
Depth Indication
(550i only)
+
i
F
1. Position the Locator directly
over the service.
2. Rotate the Locator on its axis.
3. The blade of the Locator will be
in line with the service when the
signal strength indicator is at its
minimum.
1. Apply a signal to the service.
Refer to "3 How to Use the
Transmitter" for more informa-
tion.
2. Select either 33 kHz or 8 kHz
modes to suit the the Trans-
mitter's output. Position the
Locator directly over, and at
90 degrees to the direction of
the service.
3. Press and release the i Button.
i
4. The display readout will indi-
cate the depth of the service
and the Line mode icon will be
displayed.
22
Advertisement
Table of Contents
