Table of Contents
Advertisement
DIGICAT 500i/550i, How to Use the Locator
Accessing and
1. Switch the Locator on.
2. Ensure the Locator is in Power mode.
adjusting the settings
3. Depress i Button for 2 seconds. The user settings will be displayed in the display readout.
4. Press Function Button to toggle through to desired setting.
5. Press i Button to select the setting.
6. Press Function Button to activate/adjust.
7. Press i Button to store and exit.
Danger
The Locator may fail to detect electrical services in Power mode if an incorrect power setting
is used.
Precautions:
Before use, verify the Locator is setup to be compatible with mains frequency supply in your
country. Options are 50 or 60 Hz. Refer to "Appendix B World Frequency Zones" for more
information.
Contact your agency or Leica Geosystems authorised service workshop if your unit is incor-
rectly configured for your region.
Changing the battery
If required, press Function Button to select mode.
1. Replace the batteries when the battery
status indicator is empty.
2. Press the yellow release button to unlock
the Battery Hatch. Remove the battery
holder from the Locator.
3. Replace all batteries with six new,
LR6 (AA) batteries.
Alkaline batteries should be used.
16
Advertisement
Table of Contents
