Table of Contents
Advertisement
DIGICAT 500i/550i, How to Use the Locator
Measuring Sonde depth
(550i only)
• Activating line depth will provide an inaccurate readout.
• Always use chalk or paint to mark services, never pegs or other material which are driven
• Additional services may be within the excavation zone, as well as the service you are
+
i
F
into the ground.
taking a depth reading from.
1. Switch on the sonde and set to
the required frequency. Refer
to "7 How to Use the Sonde"
for more information.
2. Select either 33 kHz or 8 kHz
mode to suit the Sonde's
output.
Position the Locator directly
over, and in line with the
Sonde. Refer to "7 How to Use
the Sonde" for more informa-
i
tion.
3. Press and hold down the
i Button for 2 seconds until the
dashed lines have scrolled
through once.
4. The display readout will indi-
cate the depth of the Sonde
and the Sonde mode icon will
be displayed.
24
Advertisement
Table of Contents
