Huawei FusionPower6000 UPS5000-H-600 kVA-FT User Manual page 59

UPS5000-H-600 kVA-FT(M)
User Manual (FusionPower6000)
Item
Maximum discharge
current (lead-acid
battery)
Battery cold start
Charger output power
Battery string sharing
Charging voltage
(lead-acid battery)
Output Electrical Specifications
Item
Rated voltage
Current (capacity: 600
kVA)
Power system
Frequency
Voltage distortion
Power factor
Transfer time
Output voltage
imbalance
Issue 02 (2024-01-05)
Specifications
1593 A. It is the EOD current of forty 12 V batteries in standard
configuration, that is, two hundred and forty 2 V battery cells (1.67 V/
cell).
If a utility power outage occurs, batteries can start the UPS to supply
power to loads.
The maximum charge power is 15% of power of a single module, and
the charge current is limited to 30 A.
● Lead-acid battery: Battery string sharing is supported in a parallel
system. No battery is shared by default.
● SmartLi 2.0: Battery string sharing is supported in a parallel system.
No battery is shared by default.
● SmartLi 3.0: Battery string sharing is not supported.
● Equalized charging voltage: 2.35 V/cell
● Float charging voltage: 2.25 V/cell
Specifications
380 V AC
912 A
Three-phase four-wire + PE
● In normal mode, the frequency is synchronous with the bypass input
frequency.
● In battery mode, the frequency is 50/60 Hz with a tolerance of
±0.05%.
● Linear load THDv < 1% (50–100% load balancing)
● Non-linear load THDv < 3% (50–100% load balancing)
1
● Double conversion mode: uninterrupted transfer 0 ms; interrupted
transfer ≤ 5 ms
● S-ECO mode: 0 ms (supported only by the three-phase four-wire
model in the 380 V/400 V/415 V system)
● Voltage imbalance: ±1%
● Phase imbalance: 120±1° (balanced load and unbalanced load)
Copyright © Huawei Digital Power Technologies Co., Ltd.
400 V AC
866 A
3 Technical Specifications
415 V AC
835 A
52