Table of Contents
Advertisement
Select Physical Disks
Select Media Type
Use this feature to select the physical disk media type. The options are HDD, SSD,
and BOTH.
The list of physical disk(s), including the related information, is displayed. Use the ar-
row keys to select the desired physical disk. For example:
Physical Disk 0:1:0, SATA, (capacity), Ready (Available when this SATA device
is detected by the BIOS)
Use this feature to disable/enable this SATA device. The options are Disabled and
Enabled.
Check All
Press <Enter> to enable all the above physical disks listed on this BIOS screen, which
are detected by the BIOS and available to create array(s).
Uncheck All
Press <Enter> to disable all the above physical disks listed on this BIOS screen, which
are detected by the BIOS and available to create array(s).
Apply Changes
Use this feature to perform changes for the features above.
OK
Press <Enter> to go back to the previous BIOS screen.
The following features regarding Configure Array Parameters are available to configure
Array Size
Use this feature to set the array size to be created.
Array Size Unit
Use this feature to set the units that the array size is displayed.
Select CacheTagSize:
Use this feature to set the Cachetag size. The size of 64KB, 128KB, and 256KB are
supported.
115
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
