Table of Contents
Advertisement
Super H13SRA-(T)F User's Manual
Security Function
Select Set Password to set a storage device password which allows you to configure the
security settings of the storage device. Select Security Erase - Password to enter a storage
device user password to allow you to erase the password and the contents previously stored
in the storage device. Select Security Erase - Without Password to use the manufacturer
default password "111111111" as the storage device user password and allow you to erase the
contents of the storage device by using this default password. The options are Disable, Set
Password, Security Erase - Password, Security Erase - PSID, and Security Erase - Without
Password.
Note: The option of Security Erase - PSID is based on the storage device support.
PSID is the abbreviation for Physical Security Identification.
Password
Use this feature to set the storage device user password which allows you to configure the
Supermicro Security Erase settings by using this user password.
New Password (Available when "Password" above has been set)
Use this feature to set the new user password for the storage device which allows you to
configure the Supermicro Security Erase settings by using this new user password.
P4: (Storage Device Name)
This section is available when the storage device is detected by the BIOS. Select this device.
Press <Enter> and the following information is displayed:
•
HDD Password Description:
•
HDD PASSWORD CONFIGURATION:
•
Security Supported:
•
Security Enabled:
•
Security Locked:
•
Security Frozen:
•
HDD User Pwd Status:
•
HDD Master Pwd Status:
Set User Password (Available when "Security Frozen:" above is No)
Press <Enter> to set the HDD user password.
138
Advertisement
Table of Contents
