Table of Contents
Advertisement
Super H13SRA-(T)F User's Manual
DfPstate (Available when "APBDIS" is set to 1)
Use this feature to set the DfPstate index from 0–4. The default setting is 0.
Power Profile Selection
Use this feature to set a power profile. The options are High Performance Mode, Efficiency
Mode, and Maximum IO Performance Mode.
DF Cstates
Use this feature to disable/enable DF Cstates. The options are Disabled, Enabled, and Auto.
Data Link Feature Cap
Use this feature to enable/disable Data Link Feature capability. The options are Enabled,
Disabled, and Auto.
Data Link Feature Exchange (Available when "Data Link Feature Cap" is set to
Enabled)
Use this feature to enable/disable Data Link Feature exchange. The options are Enabled,
Disabled, and Auto.
SEV-SNP Support
Use this feature to enable Secure Encrypted Virtualization and Secure Nested Paging (SEV-
SNP) support for memory integrity protection. The options are Disable and Enable.
CXL SPM
Use this feature to set the CXL memory as the Special Purpose Memory (SPM). The options
are Auto, Enabled, and Disabled.
Sync Header Bypass
Use this feature to enable/disable CXL Sync Header Bypass. The options are Auto, Enabled,
and Disabled.
Memory Configuration
Memory Target Speed
Use this feature to set the memory target speed in MT/s. The valid value is 3200, 3600,
4000, 4400, 4800, 5200, and 5600. The default setting is 3600.
Memory Interleaving
Use this feature to disable memory interleaving. The Non-Uniform Memory Access (NUMA)
nodes per socket will be honored regardless of this settings. The options are Disabled and
Auto.
84
Advertisement
Table of Contents
