Table of Contents
Advertisement
Local IP Address (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to enter an IP address for the local machine.
Local NetMask (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the netmask for the local machine.
Local Gateway (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the gateway address for the local machine.
Local DNS Servers (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the Domain Name System (DNS) server address for the local
machine.
Save Changes and Exit
Press <Enter> to save changes and exit. The options are Yes and No.
MAC:(MAC address)-IPv6 Network Configuration
Enter Configuration Menu
The following information is displayed:
Interface Name / Interface Type / MAC address / Host address / Route Table / Gateway
addresses / DNS addresses
Interface ID
Use this feature to change/enter the 64-bit alternative interface ID for the device. The
string format is colon separated. The default setting is the MAC address above.
DAD Transmit Count
This feature displays the number of consecutive neighbor solicitation messages have
been sent while performing duplicate address detection on a tentative address. The
default setting is 1.
Policy
Use this feature to select how the policy is to be configured. The options are automatic
and manual.
97
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
