Table of Contents
Advertisement
Super H13SRA-(T)F User's Manual
PCIe/PCI/PnP Configuration
The following information is displayed:
•
PCI Bus Driver Version
PCI Devices Common Settings:
Above 4G Decoding (Available when the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are Disabled and Enabled.
Re-Size BAR Support
Use this feature to enable/disable the Resizable BAR support if your system is with Resizable
BAR capable PCIe devices. The options are Disabled and Enabled.
SR-IOV Support
Select Enabled for Single-Root IO Virtualization support. The options are Disabled and
Enabled.
BME DMA Mitigation
If this setting is set to Enabled, the PCI Bus Driver will enable the Bus Master Attribute for
DMA transactions. If this setting is set to Disabled, the PCI Bus Driver will disable the Bus
Master Attribute for Pre-Boot DMA protection. The options are Disabled and Enabled.
Relaxed Ordering
Use this feature to enable/disable Relaxed Ordering support. Relaxed Ordering allows certain
transaction to violate PCI bus strict-ordering rules for a transaction to be completed prior to
other enqueued transactions. The options are Disabled and Enabled.
No Snoop
Use this feature to enable/disable PCIe device snooping. The options are Disabled and
Enabled.
NVMe Firmware Source
Use this feature to select the NVMe firmware to support system boot. The options are Vendor
Defined Firmware and AMI Native Support. The default option, Vendor Defined Firmware,
is pre-installed on the drive and may resolve errata or enable innovative functions for the
drive. The other option, AMI Native Support, is offered by the BIOS with a generic method.
94
Advertisement
Table of Contents
