Table of Contents
Advertisement
Super H13SRA-(T)F User's Manual
5. Grip the handle of the Carrier Frame/Processor Assembly from its shipping tray, and
while gripping the handle, align the flanges of the Carrier Frame onto the rails of the Rail
Frame so its pins will be at the bottom when the Rail Frame is lowered later.
6. Hold the two finger lift tabs of the Rail Frame, and slide the Carrier Frame/Processor
Assembly downwards to the bottom of the Rail Frame. Ensure the flanges are secure on
the rails as you lower it downwards.
Note: You can only slide the Carrier Frame/Processor Assembly in one direction with
the handle at the top. Make sure that it is properly inserted.
7. Lift up the Rail Frame till it securely rests in upright position. Be careful not to touch the
processor pad.
Carrier Frame/Processor
Assembly
26
Advertisement
Table of Contents
