Table of Contents
Advertisement
Enable Platform PMIC Control
The options are Auto, Enable, and Disable. If this feature is set to Enable, the DDR
PMIC voltages are not adjusted by the processor firmware, and could be by EC or
other platform based mechanism.
VPP Voltage Control
The following information is displayed: Current VPP Voltage
VPP Ctrl
Use this feature to set the VPP voltage. The options are Auto and Manual. Set this
feature to Auto to have the system default settings. The option of Manual allows you
to set the memory VPP voltage.
VPP Adjust (Available when "VPP Ctrl" is set to Manual)
Use this feature to set the MEM VPP in mV. The valid range is 1500–2135 mV. The
default setting is 1800.
Gaming Mode
Gaming Mode
Set this feature to Disabled to use the CCD control under AOD. The options are Disabled
and Enabled. If this feature is set to Enabled, the CCD control will not work any more.
NPS Mode
NUMA node per socket (Unavailable when "Gaming Mode" is set to Enabled)
Use this feature to set the number of NUMA nodes per socket. The options are Auto,
NPS1, NPS2, and NPS4.
Decline
Press <Enter> for not using overclocking features.
Driver Health
This feature displays the health information of the drivers installed in your system, including
LAN controllers, as detected by the BIOS. Select one and press <Enter> to see the details.
Note: This section is provided for reference only, for the driver health status will dif-
fer depending on the drivers installed in your system. It's also based on your system
configuration and the environment that your system is operating in.
129
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
