Table of Contents
Advertisement
Super H13SRA-(T)F User's Manual
Supermicro 10GBASE-T Ethernet Contorller - (MAC address)
Note: The Ethernet controller and MAC addresses shown above are based on you
system features.
Firmware Image Menu
The following information is displayed:
•
Boot Code
•
MBA
•
EFI
•
NC-SI
•
RDMA FW
Device Configuration Menu
Multi-Function Mode
Use this feature to set the NIC Hardware Mode. Switching from multi-function to single
function will result in the clearing of Virtual Function values in the extended partitions. The
options are SF and NPAR 1.0.
SR-IOV
Select Enabled for Single-Root IO Virtualization support. The options are Disabled and
Enabled.
Number of MSI-X Vectors per VF
Use this feature to set the number of MSI-X Vectors per VF (1–64). The default setting is 16.
Maximum Number of PF MSI-X Vectors
Use this feature to set the maximum number of PF MSI-X Vectors (0–512 per controller).
The default value is 255.
Energy Efficient Ethernet
Use this feature to disable/enable the Energy Efficient Ethernet operation. The options are
Disabled and Enabled.
Operational Link Speed
Use this feature to set the default link speed for the selected port. The default setting is
AutoNeg.
108
Advertisement
Table of Contents
