Table of Contents
Advertisement
Super H13SRA-(T)F User's Manual
Controller Management
View Controller Information
Select Controller:
Press <Enter> to select a controller.
The following information is displayed:
•
Segment:Bus:Device:Function
•
PCI ID
•
Controller Physical Disk Count
Rescan Disks
Use this feature to perform a rescan of all physical disks and arrays that are connected
to the controller.
The following information is displayed:
•
Physical Disk(s)
•
Array(s)
OK
Press <Enter> to go back to the previous BIOS screen.
Array Management
Create Array
Create Array
This feature is available when the features of "Select RAID Level:" and "Select Physical
Disks" below have been set. Press <Enter> to continue to create array(s).
Select RAID Level:
This feature allows you to select the RAID level. The options are Volume, RAIDABLE,
RAID 0, RAID 1, RAID 5, RAID 10. Available RAID levels are based on the number of
disks connected to the system.
114
Advertisement
Table of Contents
