Table of Contents
Advertisement
View Associated Physical Disks
Use this feature to display information of the physical disks that are associated with
the array you selected by using the feature of "Select Array" above.
Physical Disk (Available when the physical disk is detected by the BIOS)
Use this feature to select the physical disk that you'd like to view its properties by us-
ing the feature of "View Physical Disk Properties" below. The options are Disabled
and Enabled.
View Physical Disk Properties (Available when any of physical disks
on this BIOS screen is enabled)
Press <Enter> and the information regarding the physical disk properties is displayed:
Physical Disk ID / State / Size / SMART Status / Revision / Device Type / Connected
Port / Available Space / Used Space / Disk Protocol / Negotiated Link Speed
The information regarding the associated array(s) is displayed: Serial Number /
Model Number
Manage Dedicated Hot Spares
Use this feature to display and/or assign additional dedicated hot spares for the array
you selected by using the feature of "Select Array" above.
Delete Array
The list of array(s), including the RAID level related information, is displayed. Use the
arrow keys to select the desired array. For example:
Array 1, RAID5, 318.8 GB, Critical
This feature depends on the array(s) you created earlier. The options are Disabled and
Enabled. If you'd like to delete this array, set this feature to Enabled.
Check All
Press <Enter> to enable all the above arrays listed on this BIOS screen.
Uncheck All
Press <Enter> to disable all the above arrays listed on this BIOS screen.
117
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
