Table of Contents
Advertisement
RAIDXpert2 Configuration Utility
Use this submenu to configure NVMe/SATA RAID settings (this motherboard supports RAID
0/1/5/10).
•
For NVMe RAID settings, please set "NVMe RAID Mode" (Advanced > PCIe/PCI/PnP
Configuration, on
page
•
For SATA RAID settings, please set "PT21 SATA Mode" (Advanced > PCIe/PCI/PnP Con-
figuration, on
page
95) to RAID Mode.
Save settings (you can press <F4>) and reboot the system for changes to take effect. This
submenu will be displayed on the BIOS screen below.
The following information regarding Firmware Properties is displayed:
•
UEFI Driver Version
•
Firmware Build Time
•
Total Physical Controllers
•
AHCI Controllers
•
NVMe Controllers
•
Total Physical Device Count
•
Total Logical Array Count
95) to Enabled.
113
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
