Peripheral Devices
•
One front accessible USB 2.0 header (USB0/1) with support of two USB connections
•
One front accessible USB 3.2 Gen. 1 header (USB2/3) with support of two USB connections (5 Gb, Type-A)
•
Four USB 3.2 Gen. 2 ports on the rear I/O panel (USB4/5/6/7, 10 Gb, Type-A)
•
One front accessible USB 3.2 Gen. 2 20-pin header (USB8, 10 Gb)
•
One USB 3.2 Gen. 2x2 port on the rear I/O panel (USB9, 20 Gb, Type-C)
BIOS
•
AMI BIOS
•
ACPI 6.3, PCI firmware 4.0 support, BIOS rescue hot-key, SPI dual/quad speed support, Real Time Clock (RTC) wakeup,
and SMBIOS 3.0 or later
Power Management
•
ACPI power management (S4/S5)
•
Power-on mode for AC power recovery
•
Wake-on-LAN
System Health Monitoring
•
Onboard voltage monitoring for +3.3V, +5V, +12V, +3.3V standby, and +5V standby
•
Onboard temperature monitoring for CPU, VRM, LAN, system, and memory
•
CPU/System overheat control
•
CPU thermal trip support
Fan Control
•
Fan status monitoring via IPMI connections
•
Dual cooling zones
•
Low-noise fan speed control
•
Seven 4-pin fan headers
System Management
•
SuperDoctor® 5
•
Chassis intrusion header and detection
•
IPMIView, SMCIPMITOOL, and IPMICFG
•
SPM and SUM-OOB/InBand
Firmware Integrity/System Security
•
Trusted Platform Module (TPM) support
LED Indicators
•
CPU/system overheat LED
•
Power LED
•
Fan failed LED
•
UID/remote LED
•
HDD activity LED
•
LAN Activity LED
•
BMC Heartbeat LED
•
M.2 LEDs
Dimensions
•
ATX 12" (L) x 9.6" (W) (305 mm x 243.8 mm)
15
Chapter 1: Introduction