LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual
Prerequisites
●
●
●
Procedure
Step 1 Remove the fan and disconnect the cables.
Step 2 Install a new fan and connect the cables.
Step 3 Secure the fan cover.
----End
Follow-up Procedure
Step 1 Power on the system. For details, see the power-on section in the ESS user
manual.
Step 2 Check the running status of the system and ensure that the functions are restored.
----End
Issue 02 (2023-02-28)
6
Replacing a Battery Pack Fan
Fault locating:
a.
Log in to the SmartLogger WebUI, CMU WebUI, FusionSolar app, or
management system to view alarm information.
b.
Refer to the alarm handling suggestions in the alarm list.
Tool: flat-head or Phillips insulated torque screwdriver
Power off the ESS. For details, see
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Replacing a Battery Pack Fan
2.2 Powering Off a Single
ESS.
85