Replacing A Fan Module - Huawei OceanStor S2600 Manual

6 Replacing Parts
l
----End
Postrequisite
After replacing the disk module, mark the removed disk module for later handling.

6.5 Replacing a Fan Module

This section describes how to replace a fan module.
Impact on the System
During the process of replacing a fan module, the performance and reliability of the system may
be degraded.
Prerequisite
Before you replace a fan module, the following conditions are required:
l
l
l
Tools and Materials
Before replacing a fan module, prepare the following tools:
l
l
l
l
l
Precaution
When replacing a fan module, pay attention to the following:
l
l
l
6-8
No: On the menu bar, choose Alarm > Alarm Management... to go to the Alarm
Management interface. According to Advice on the Current Alarm tab, remove the fault.
If the fault persists, contact technical support engineers. For how to obtain technical support,
see 3.4 Obtaining Technical
NOTE
During the process of replacing a fan module, the performance and reliability of the system may be
degraded; therefore, it is suggested to replace the controller during the time period that services are not
busy.
The spare parts to be used are ready.
The configuration data is backed up.
To fan module to be replaced is located.
ESD-preventive gloves
ESD-preventive wrist strap
ESD-preventive clothes
ESD-preventive bag
Tag
Remove and insert a fan module with equal force; otherwise, too much force may cause
damage to the physical appearance or plug-ins.
When replacing a fan module, you must remove the fan module and install a new fan module
within one and a half minutes.
Do not remove the two fan modules at the same time.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Support.
OceanStor S2600 Storage System
Troubleshooting
Issue 03 (2010-01-28)