LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual
Table 19-1 DIP switch settings
Toggle
Switch 1
1
Step 2 Disconnect cables from the T/H sensor.
Step 3 Removing the faulty T/H sensor.
Step 4 Set the DIP switches for a new T/H sensor based on the recorded information.
Step 5 Install the new T/H sensor.
Step 6 Connect the cables.
Step 7 Check that no alarm is generated.
----End
Issue 02 (2023-02-28)
Toggle
Switch 2
2
Copyright © Huawei Digital Power Technologies Co., Ltd.
Toggle
Toggle
Switch 3
Switch 4
3
ON
19 Replacing a T/H Sensor
Toggle
Toggle
Switch 5
Switch 6
ON
ON
134