Huawei LUNA2000-200KWH-2H1 Maintenance Manual page 162

LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual
Figure 27-2 Wiping a polished or damaged area using anhydrous alcohol
Step 3 Paint zinc-rich primer on the damaged coat using a brush or paint spray gun.
● If the base material is exposed in the area to be repaired, apply epoxy zinc-rich
● Select epoxy zinc-rich primer or acrylic acid top coat with a color the same as
Step 4 Apply paint evenly to the damaged area based on the damage degree of the paint
using an aerosol spray, brush, or paint spray gun until all damage traces are
invisible.
● Ensure that the painting is thin, even, and smooth.
● In the case that an equipment pattern has different colors, to prevent
Figure 27-3 Repainting a damaged area
Step 5 Wait for 30 minutes and check whether the painting meets the requirements.
Issue 02 (2023-02-28)
NO TICE
primer, wait until the paint has dried, and then apply acrylic acid top coat.
the surface coating color of the equipment.
NO TICE
undamaged areas and those with different colors as the damaged area from
being contaminated during repainting, cover such areas using white paper and
adhesive tape before repairing paint.
Copyright © Huawei Digital Power Technologies Co., Ltd.
27 FAQ
156