Huawei LUNA2000-200KWH-2H1 Maintenance Manual page 134

LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual
Step 7 (Optional) If all configuration files are not exported before the device
replacement, set the CMU parameters.
1.
2.
3.
----End
Issue 02 (2023-02-28)
Log in to the CMU and choose Maintenance > Device Mgmt. > Connect
Device > Add Devices to add a power meter, SMU, CO sensor, T/H sensor,
and exhaust controller.
Table 16-1 Parameter settings
Device
Power meter
SMU
a
CO sensor 1
a
CO sensor 2
T/H sensor
Exhaust controller
Note a: CO sensor 1 is on the left, and CO sensor 2 is on the right. For the
specific positions, see
Figure 16-6 Adding a device
Click Auto Assign Address, select Adjust Address, and search and add the air
conditioner again.
Click Monitoring to check whether the battery rack has been connected.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Connection Mode/Port
Number
COM1
COM2
COM3
COM3
COM3
COM2
Figure 21-1.
16 Replacing a CMU
Address
11
33
1
15
56
38
128