Danfoss VLT AutomationDrive FC 360 Design Manual page 80

Design Guide | VLT® AutomationDrive FC 360
Motor control (speed, torque, or process).
¢
Control algorithms (VVC+, Flux Sensorless, and flux with motor feedback).
l
Reference Handling
8.3.2
Local and Remote Reference
8.3.2.1
Local reference
The local reference is active when the drive is operated with [Hand On] active. Adjust the reference via the Up key, Down key, Right key
and the [Back] key.
Remote reference
The reference handling system for calculating the remote reference is shown in the
78
| Danfoss A/S © 2024.01
Figure 38.
AJ435824192086en-000101 / 130R1295