Installation; Installation Requirements - Goodwe SDT Series User Manual

05 Installation

5 Installation

5.1 Installation Requirements

Installation Environment Requirements
1. Do not install the equipment in a place near flammable, explosive, or corrosive materials.
2. Install the equipment on a surface that is solid enough to bear the inverter weight.
3. Install the equipment in a well-ventilated place to ensure good dissipation. Also, the
installation space should be large enough for operations.
4. The equipment with a high ingress protection rating can be installed indoors or outdoors.
The temperature and humidity at the installation site should be within the appropriate range.
5. Install the equipment in a sheltered place to avoid direct sunlight, rain, and snow. Build a
sunshade if it is needed.
6. Do not install the equipment in a place that is easy to touch, especially within children's
reach. High temperature exists when the equipment is working. Do not touch the surface to
avoid burning.
7. Install the equipment at a height that is convenient for operation and maintenance, electrical
connections, and checking indicators and labels.
8. The invertert should be installed in a place with the altitude lower than the maximum
operating altitude of 4000 m. When the altitude is higher than 2000 m, the inverter will be
derated.
9. Inverters installed in salt-damaged areas may suffer from corrosion. Salt-damaged areas
refer to areas within 1000 m of the coast or affected by sea winds. The areas affected by sea
wind vary depending on meteorological conditions (such as typhoons, seasonal winds) or
terrain (with embankments, hills).
10. Install the inverter away from high magnetic field to avoid electromagnetic interference.If
there is any radio or wireless communication equipment below 30MHz near the inverter, you
have to:
• Add a low pass EMI filter or a multi winding ferrite core to the DC input cable or AC output
cable of the inverter.
• Install the inverter at least 30m far away from the wireless equipment.
Children No Touch
20
User Manual V1.3-2024-01-25