Goodwe SDT Series User Manual page 25

User Manual V1.3-2024-01-25
05 Installation
≥300mm
≥200mm ≥200mm
≥300mm
≥500mm
ALT: 4000m
IP66
0%~100%RH
Mounting Support Requirements
• The mounting support shall be nonflammable and fireproof.
• Make sure that the support surface is solid enough to bear the product weight load.
• Do not install the product on the support with poor sound insulation to avoid the noise
generated by the working product, which may annoy the residents nearby.
Installation Angle Requirements
• Install the inverter vertically or at a maximum back tilt of 15 degrees.
• Do not install the inverter upside down, forward tilt, back forward tilt, or horizontally.
21