Storage - Goodwe SDT Series User Manual

User Manual V1.3-2024-01-25
[1] The type of the mounting plate epends on the model of the inverter.
[2] The number of PV connectors equals with the number of the inverter's DC input terminals.
[3] The number of expansion bolts depends on the inverter model.
[4] Communication module types are available: WiFi/4G/Bluetooth/LAN. The actual delivered
type depends on the selected inverter communication method.
[5] The number of communication connector and PIN terminals matches the selected
communication method. The number of 2 PIN terminals, 3 PIN terminals or DRED/RCR
communication terminals varies for difference communication configuration.
[6] USB-RS485 conversion cable is for Brazil inverters only.
[7] For the Brazil model of GW12KLV-SDT-C30 and GW17KLV-SDT-C30 only.

4.3 Storage

If the equipment is not to be installed or used immediately, please ensure that the storage
environment meets the following requirements:
1. Do not unpack the outer package or throw the desiccant away.
2. Store the equipment in a clean place. Make sure the temperature and humidity are
appropriate and no condensation.
3. The height and direction of the stacking inverters should follow the instructions on the
packing box.
4. The inverters must be stacked with caution to prevent them from falling.
5. If the inverter has been long term stored, it should be checked by professionals before being
put into use.
NOTICE
19
04 Check and Storage