Table of Contents
Advertisement
User Manual V1.0-2023-07-30
5 Installation
5.1 Installation Requirements
Installation Environment Requirements
1. Do not install the equipment in a place near flammable, explosive, or corrosive materials.
2. Install the equipment on a surface that is solid enough to bear the inverter weight.
3. Install the equipment in a well-ventilated place to ensure good dissipation. Also, the
installation space should be large enough for operations.
4. The equipment with a high ingress protection rating can be installed outdoors. The
temperature and humidity at the installation site should be within the appropriate range.
5. Install the equipment in a sheltered place to avoid direct sunlight, rain, and snow.
6. Do not install the equipment in a place that is easy to touch, especially within children's
reach. High temperature exists when the equipment is working. Do not touch the surface to
avoid burning.
7. Install the equipment at a height that is convenient for operation and maintenance, electrical
connections, and checking indicators and labels.
8. Install the product away from electromagnetic interference. Install the equipment away
from electromagnetic interference. If there are radio stations or wireless communication
equipment below 30 MHz near the installation location, install the equipment as follows:
• Add a multi-turn winding ferrite core at the DC input line or AC output line of the inverter,
or add a low-pass EMI filter.
• Install the inverter at least 30m far away from the wireless equipment.
≥200mm
≥200mm
≥20mm
≥200mm
≥100mm
≥200mm
No touch during
operation.
13
05 Installation
ALT: 2000m
Advertisement
Table of Contents
