Installation; Installation Requirements - Goodwe ETC Series User Manual

User Manual V1.0-2023-04-30

5 Installation

5.1 Installation Requirements

Installation Environment Requirements
1. Do not install the equipment in a place near flammable, explosive, or corrosive materials.
2. Do not install the equipment in a place that is easy to touch, especially within children's reach.
High temperature exists when the equipment is working. Do not touch the surface to avoid
burning.
3. Install the equipment in a sheltered place to avoid direct sunlight, rain, and snow.
4. The place to install the equipment shall be well-ventilated for heat dissipation and large
enough for operations.
5. The equipment can be installed indoors. The temperature and humidity at the installation site
should be within the appropriate range.
6. Install the equipment at a height that is convenient for operation and maintenance, electrical
connections, and checking indicators and labels.
7. The altitude to install the inverter shall be lower than the maximum working altitude 4000m.
8. Install the equipment away from electromagnetic interference. If there is any radio or
wireless communication equipment below 30MHz near the equipment, you have to:
• Add a multi-turn winding ferrite core at the DC input line or AC output line of the inverter,
or add a low-pass EMI filter.
• Install the inverter at least 30m far away from the wireless equipment.
23
05 Installation