Inverter Installation; Moving The Inverter - Goodwe SDT Series User Manual

05 Installation
Installation Tool Requirements
The following tools are recommended when installing the equipment. Use other auxiliary tools
on site if necessary.
Goggles
Diagonal pliers
Marker
Multimeter

5.2 Inverter Installation

5.2.1 Moving the Inverter

Move the inverter to the site before installation. Follow the instructions below to avoid
personal injury or equipment damage.
1. Consider the weight of the equipment before moving it. Assign enough personnel to move
the equipment to avoid personal injury.
2. Wear safety gloves to avoid personal injury.
3. Keep balance when moving the equipment.
Safety shoes Safety gloves
Wire stripper Hammer drill
Heat shrink
Level
Vacuum
MC4 DC wiring
cleaner
Dust mask
Heat gun
tube
Jingko wiring
wrench
CAUTION
22
User Manual V1.3-2024-01-25
Torque wrench
Terminal
crimping tool
Rubber
Utility knife
hammer
wrench
M4/M5
/M6