Installing The Inverter - Goodwe SDT Series User Manual

User Manual V1.3-2024-01-25

5.2.2 Installing the Inverter

• Avoid the water pipes and cables buried in the wall when drilling holes.
• Wear goggles and a dust mask to prevent the dust from being inhaled or contacting eyes
when drilling holes.
• The anti-theft lock of appropriate size should be prepared by customers.
GW8000-SDT-30, GW10K-SDT-30, GW10K-SDT-EU30, GW12K-SDT-30, GW15K-SDT-30
Step 1 Put the mounting plate on the wall horizontally and mark positions for drilling holes.
Step 2 Drill holes to a depth of 60 mm using the hammer drill. The diameter of the drill bit
should be 8 mm.
Step 3 Secure the mounting plate using the expansion bolts.
Step 4 Install the inverter on the mounting plate. Tighten the nuts to secure the mounting plate
and the inverter.
Step 5 Install the anti-theft lock.
NOTICE
60
23
05 Installation