Finding Your Way Around The Menus - Accusys ACS-8990 User Manual

Finding your way around the menus

The main menu is the hub for all configuration choices. It consists of seven submenus and
one hidden submenu. All configuration options are exercised from within these submenus.
The main menus, as viewed from the Monitor Utility, for the two available hardware
configurations of ACS-8990 are shown below:
SCSI host interface configuration
The table below is a quick reference resource to help you find your way around the
submenus:
Name of submenu
Quick setup
RAID params
SCSI params*
FC params**
RS232 params
System params
NVRAM
RAID funcs
*SCSI host interface configuration only
**Fibre host interface configuration only
44
ACS-8990/89200/89230 User's Manual
Functions
Quickly establish a single RAID– see Chapter 3
Set parameters for a single or multiple arrays
Set SCSI parameters such as SCSI ID, speed and
LUN mapping
Set fibre channel parameters, such as hard loop ID,
connection mode, data rate and LUN mapping and
enable/disable SAN masking
Set parameters for modem connection and RS232
connection to terminal
Set / enable / disable password security
Configure fax and pager alert settings
Save new configurations and restart RAID controller
Initialize and check RAID 5 / 3 / 50/ 30 arrays
Add and remove disks to existing arrays
View system statistics
Cancel error messages
Alarm settings
Expand array
Disk Scrubbing /Clone/SMART
Update firmware
Fibre host interface configuration