Quick Setup With The Monitor Utility - Accusys ACS-8990 User Manual

Quick Setup with the monitor utility

Users wishing to perform Quick Setup via the monitor utility must first establish a connection
between the host terminal and ACS-8990. Follow the instructions in Chapter 5, Accessing the
Monitor Utility. Then:
1. Press Ctrl and D together to launch the monitor utility.
2. Press Enter. You will be prompted to enter a password.
3. Enter the default password 00000000 (eight zeros). Press Enter.
4. The main menu will appear.
5. Use the arrow keys to select 0 Quick Setup. Press Enter.
6. The Quick Setup submenu lists the RAID levels available (5, 3, 1, 0, 0+1, 50, 30 and
NRAID). Scroll through the list until the appropriate level for the RAID you want to set up
is highlighted. Press Enter.
7. You will be prompted for confirmation of your selection. Select Yes and press Enter.
34
ACS-8990/89200/89230 User's Manual
This section is intended as a Quick Setup guide only. Full instructions on
accessing and using the Monitor Utility are given in Chapter 4.
A JBOD array cannot be setup using the Quick Setup option