Key Features; Hard Drive Hot Swapping; Automatic Drive Rebuilding; Making Sure You Have Everything - Accusys ACS-76130 Manual

Key features

The ACS-76130 supports the following features:

Support 3 SATA-I disk channels.

Support one SATA-I host channel

Support RAID level 0 and 5
 Drives are hot swappable

Hot transparent and OS independent

Fan cooler (Ball bearing type)

Support ATA-6 big drive

Key locking to prevent unauthorized access to the disk drives
 Audible alarm on drive failure

Automatic drive failure detection

Automatic online rebuilding

Audible alarm on drive failure

Battery backup for disk rebuild status

Hard drive hot swapping

Hot Swapping allows for the removal and installation of disk drives without the need to power
down the system while ACS-76130 is configured as a RAID 5 array.

Automatic drive rebuilding

If a member drive in a RAID 5 array is replaced on-line, the controller will automatically start to
rebuild data to the new drive.

Making sure you have everything

What's in the box

Some vendors may ship certain components as standard, while other vendors treat the same
component as optional. In its most basic configuration, your package should include the
following:

ACS-76130 RAID box
 ACS-76130 Controller User's Manual and GUI management software

Three disk drive carriers with key locks

Disk drive mounting screws
 Two keys for drive carriers (identical)

What else you need

In order to setup a working system the following user-supplied items are required:

System with SATA Interface

Case with two half-height 5 ¼" drive bays with front bezel access

One SATA channel cable connector

One free power supply connector at least
One 3-pin RS232 cable connector (data connection for GUI interface, if required)