Emergency Stop Of A Charge Session - ABB Terra 94 UL Operation And Installation Manual

Operation and correct use

8.3.3 Emergency stop of a charge session

NOTE
Stop by emergency button is possible only if the optional button is installed on the front door of
the EVSE.
The EVSE stops the charge session when the emergency stop is pushed.
Only push the emergency stop if there is an emergency!
If there is an emergency:
• Push the emergency stop button. The EVSE stops the operation and the display will become red.
• Contact the Site operator.
NOTE
Only push the emergency stop if there is an emergency!
If the emergency stop button is accidentally pushed:
• Verify that the situation is safe.
• Pull the emergency stop button out by twisting the button. The EVSE is reactivated and after a few seconds
the charger returns to normal operation.
65