Visual Inspection On The Packaged Evse - ABB Terra 94 UL Operation And Installation Manual

Transport, handling and unpacking
• Read and follow the operating and safety instructions labeled on the package.
• The package of product should must not be broken and/or scratched in any point.
NOTE
If the package is damaged and/or scratched check the external cosmetic of product by
removing the protections.
• The pallet shall be intact and not damaged for a safe transportation and handling of the product.
NOTE
If damage is observed, document it and contact ABB.
• Check the shock and tilt sensors.
When you unload the EVSE, if tilt and/or shock sensors are activated:
- Do not refuse the shipment.
- Make notation on delivery receipt and inspect for damage.
- If damage has occurred, leave item in its original packaging and indicate it on the transport document (ex.
CMR – Bill of lading – AWB – delivery note ); otherwise request immediate inspection from carrier within the
applicable time period. Provide pictures to ABB service team also.
How to check the Shock sensor label
When the shock watch is subjected to an impact exceeding a specified
G-level, the dot will became red creating a permanent and immediate
indication of mishandling. Normal movement or road shock won't affect
the device. Once activated, the shock watch cannot be reset.
How to check the Tilt sensor label
It provides indisputable evidence regarding the degree of inclination
achieved by the EVSE during handling and transport.
If inclinations exceed 30° the unit must be inspected.
• Check the integrity of the charging connector(s) of the EVSE. The charging connector(s) and their cables shall
be not damaged and/or scratched.
NOTE
If damage is observed, document it and contact ABB.
4.1.2

Visual inspection on the packaged EVSE

• Handling personnel must wear all appropriate and applicable personal protective equipment (PPE) and
follow all the applicable Health and Safety measures applicable to the working area.
• Handling operators must comply to all local regulations.
• Check the weight on the transport document before moving the load.
• Check the position of the center of gravity before lifting the EVSE.
The higher the position of center of gravity, the more care is required to handle the EV Charger to avoid
overturning.
33
ShockDot ShockDot
WARNING WARNING
ShockDot ShockDot
WARNING WARNING
TiltWatch PLUS
TiltWatch PLUS
TiltWatch PLUS
TiltWatch PLUS