ABB Terra 94 UL Operation And Installation Manual page 57

Electrical connection
A
B
• Install the three Main AC protection barriers (42). Refer
to "5.4.2. Install the Main AC protection barriers"
installation procedure.
42
• Close the sliding plate using the 2 side screws (A).
NOTE
Tighten the system until the sponges close
the spaces around the AC cables.
Do not overtighten the AC cables to avoid
damaging them.
NOTE
The AC cables entry system is not a cable
A
retention system (use cable ties to lock the
cables in place). The purpose of the AC cable
B
entry system is to seal the cable openings
through the sponges.
• Lock in position the plate by screwing the 2 screws (B).
57
for the