Internal Expansion Card - Supermicro SUPERSERVER 1028U-E1CR4+ User Manual

Internal Expansion Card

For most models, the pre-installed Ultra riser card that holds your LAN ports also
offers another internal low profile card slot for Supermicro SAS only.
Installing the Internal Expansion Card
1. Remove the cover.
2. Remove the Ultra riser card (see Section 6-7).
3. Mount a bracket to hold the SAS expansion card onto the Ultra riser card.
(Figure 6-9)
4. Insert the SAS expansion card.
5. Insert the whole assembly back into the system.
Figure 6-9. Installing the Internal Expansion Card
Chapter 6: Advanced Chassis Setup
6-9