Appendix C System Specifications - Supermicro SUPERSERVER 1028U-E1CR4+ User Manual

Table of Contents

Advertisement

Appendix C: System Specifications
Appendix C
System Specifications
Processors
Two Intel E5-2600 v3/v4 series processors in LGA 2011 sockets (R3)
Note: Please refer to our web site for a complete listing of supported processors.
Chipset
Intel PCH C612
BIOS
16 MB SPI AMI BIOS
SM Flash UEFI BIOS
®
Memory Capacity
Integrated memory controller supports DDR4 288-pin memory of up to 3 TB of Load
Reduction (LRDIMM) or of up to 768 GB of Registered (RDIMM)/Non-volatile (NV-
DIMM) EEC 2400/2133/1866/1600/1333 MHz modules in 24 DIMM slots.
Note: See the memory section in Chapter 5 for details.
SATA Controller
Ten SATA 3.0 ports; six ports supported by the Intel PCH and four ports
supported by the Intel SCU (RAID 0, 1, 5 and 10 are supported by Intel RSTe
Software RAID)
Drive Bays
The chassis supports ten hot-swap 2.5"hard disk drives. The default configuration
supports SATA drives. Expansion cards allow SAS3.
LAN Connections
1028U-E1R4+: Four GbE
1028U-E1RTP+: Two GbE and two 10G SFP+
C-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superserver 1028u-e1crtp+

Table of Contents