Table of Contents
Advertisement
Installing a Full Height or GPU Expansion Card
1. Power down the system as described in section 6-2 and remove the cover.
2. Remove the bracket and sections of the chassis in the rear. Small screwdriver
icons are etched into the chassis pieces to help identify which screws must be
removed.
Figure 6-6. Riser Card Bracket and Expansion Slots
Figure 6-7. Example of Screwdriver Icons
3. If necessary, attach the riser card to the riser card bracket using screws.
4. Insert the expansion card into a slot on the riser card while aligning the expansion
card backplate with the open slot in the rear of the chassis.
Chapter 6: Advanced Chassis Setup
Icons
6-7
Advertisement
Table of Contents
