Table of Contents
Advertisement
S
S
UPER
5-10 Onboard Indicators
LAN Port LEDs
The Ethernet ports have two LEDs.
One LED indicates activity when
blinking while the other LED may be
green, amber or off to indicate the
speed of the connection. See the
table on the right for the functions
codes
associated with the connection speed
s.>
LED.
IPMI Dedicated LAN LEDs
A dedicated IPMI LAN port is located
on the rear I/O panel. The amber LED
on the right indicates activity, while the
LED on the left indicates the speed of
the connection. See the tables at right
for more information.
HDD Heartbeat LED
An HDD heartbeat LED is located next
to the JF1 header. When this green
LED is blinking, HDD devices are
functioning normally. See the table at
right for more information.
Onboard Power LED
An Onboard Power LED is located at
LED2 on the serverboard. When this
LED is on, the system is on. Be sure
to turn off the system and unplug the
power cord before removing or install-
ing components. See the tables at right
for more information.
ERVER 1028U-E1CR(4/TP)+ User's Manual
LAN LED
Connection Speed Indicator
LED Color
Definition
Off
No connection, 10 Mb/s, 100 Mb/s
Green
10 Gbps (1028U-E1CRTP+ Only)
Amber
1 Gb/s
Link LED
IPMI LAN Activity Indicator
LED Settings
Color
Status
Amber
Flashing
IPMI LAN Speed LED
LED Color
Off
10 Mbps, or No Connection
Green
100 Mbps
Amber
1 Gbps
HDD Heartbeat LED
Color/State
Green:
Blinking
Onboard PWR LED Indicator
LED Color
Off
Green
Green:
Flashing
Quickly
5-20
Activity LED
Definition
Active
Definition
States
Definition
HDD: Normal
LED States
Definition
System Off (PWR cable
not connected)
System On
ACPI S1 State
Advertisement
Table of Contents
