X10Dru-I+ Quick Reference - Supermicro SUPERSERVER 1028U-E1CR4+ User Manual

X10DRU-i+ Quick Reference

Jumper
JBT1
JPB1
JPG1
JPME2
JPP0/JTAG SCAN
JPP1/JTAG SCAN
JWD1
Connectors Description
BP PWR1/2 Backplane power connectors
COM1 COM Port1
Fan1-8 CPU/System Fan Headers
GPU PWR1-PWR4 8-pin Power Connectors (1-4) for GPUs
JF1 Front Control Panel Header
JF2 4-pin Power Connector for LAN 3/4 LED
JL1 Chassis Intrusion Header
JIPMB1 4-pin External BMC I
JSD1/JSD2 SATA DOM (Device on Module) Power Connectors
JTPM1 TPM (Trusted Platform Module)/Port 80 Header
IPMI_LAN Dedicated IPMI LAN Support (by the ASpeed controller)
PSU1/PSU2 Power Supply Unit 1/Unit 2 Headers
I-SATA0~3, 4, 5 SATA 3.0 Ports (Intel PCH)
S-SATA 0~3 SATA 3.0 Ports (Intel SCU)
SXB1A/1B/1C Proprietary PCIe Slot used for WIO-Left Devices (supported by CPU2)
SXB2 Proprietary PCIe 3.0x8 Slot for WIO-Right Devices or Add-on Cards (supported
by CPU2)
SXB3A/3B/3C Proprietary PCIe Slot for Ultra Riser Devices (supported by CPU1)
I-SGPIO2 Serial Link General Purpose I/O (SGPIO) header (for S-SATA ports)
USB 0/1 (3.0) Rear USB 3.0 Ports
USB 2 (3.0) Type A USB 3.0 Header
USB 3/4 (3.0) Front Accessible USB 3.0 Headers
VGA VGA Port
Description
Clear Onboard CMOS Battery
BMC Enable
VGA Enable
ME Manufacturing Mode Select
CPU1 JTAG Scan Enable
CPU2 JTAG Scan Enable
Watch Dog Timer Enable
C Header (for an IPMI card)
2
5-11
Chapter 5: Advanced Serverboard Setup
Default Setting
See Section 5-8
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-4 (Includes CPU2, 2-3: isolates
CPU1)
Pins 1-4 (Includes CPU1, 2-3: isolates
CPU2)
Pins 1-2 (Reset)