Table of Contents
Advertisement
S
S
UPER
ERVER 1028U-E1CR(4/TP)+ User's Manual
1-2
Motherboard Features
At the heart of the SuperServer 1028U-E1CR(4/TP)+ lies the X10DRU-i+, a dual
processor motherboard based on the Intel PCH C612 chipset. Below are the main
features of the motherboard. (See Figure 1-1 for a block diagram of the chipset).
Processors
The server supports single or dual Intel E5-2600 v3/v4 Series processors in R3
LGA 2011 sockets (Socket R3). Refer to the Supermicro web site for a complete
listing of supported processors.
Memory
The server features 24 DIMM slots that can support up to 3TB of ECC Load
Reduction (LRDIMM) or up to 768 GB of ECC Registered (RDIMM) DDR4-
2400/2133/1866/1600/1333 SDRAM.
Onboard Serial ATA
A SATA controller is integrated into the chipset to provide a ten-port SATA sub-
system. Six of the ports are supported by the Intel PCH and four of the ports are
supported by the Intel SCU. The SATA 3.0 ports are connected to the backplane
by default. RAID 0, 1, 5 and 10 are supported by Intel RSTe Software RAID.
Input/Output
The system comes with basic I/O ports for VGA, COM, two USB 3.0, and one
IPMI connection. In addition, there are several possible networking configurations
depending on the pre-installed Ultra riser card. See the table in Section 1-1.
1-2
Advertisement
Table of Contents
