Memory - Supermicro SuperServer SYS-111E-FWTR-EU User Manual

3.4 Memory

The X13SEW-TF motherboard supports up to 2 TB of ECC RDIMM/RDIMM 3DS DDR5
memory in eight memory slots. The memory types supported are RDIMM, RDIMM 3DS, and
9x4 RDIMM, which are not compatible with each other. Use only RDIMM, RDIMM 3DS, or 9x4
RDIMM when installing memory. The 4th Generation Intel Xeon Scalable Processor memory
has speeds of up to 4800 MT/s (4400 MT/s when fully populated), while the 5th Generation
Intel Xeon Scalable Processor memory has speeds of up to 5600 MT/s (4400 MT/s when
fully populated). Refer to the table below for the recommended DIMM population order.
Note 1: Remove power as described in
Note 2: Use one DIMM per channel when populating the channels.
Number of DIMMs
1
2
4
6
8
Chapter 3: Maintenance and Component Installation
Section 3.1 before removing or installing DIMMs.
1 CPU, 8 DIMM Slots
Memory Population Sequence
DIMMA1 / DIMMG1
DIMMC1 / DIMME1
DIMMA1 / DIMMG1 / DIMMC1 / DIMME1
DIMMA1 / DIMMG1 / DIMMC1 / DIMME1 / DIMMD1 / DIMMF1
DIMMA1 / DIMMG1 / DIMMC1 / DIMME1 / DIMMB1 / DIMMH1
DIMMC1 / DIMME1 / DIMMB1 / DIMMH1 / DIMMD1 / DIMMF1
DIMMA1 / DIMMG1 / DIMMB1 / DIMMH1 / DIMMD1 / DIMMF1
DIMMA1 / DIMMG1 / DIMMB1 / DIMMH1 / DIMMD1 / DIMMF1 /
DIMMC1 /DIMME1
46
DIMMA1
DIMME1