Supermicro SuperServer SYS-111E-FWTR-EU User Manual page 67

COM Port
There is one COM connection on this motherboard. COM1 is located next to the dedicated
BMC LAN.
LAN Ports
The motherboard has two 10GbE LAN port located on the I/O panel. The two 10GbE LAN
ports accept RJ45 cables. In addition to the LAN ports, there is one dedicated BMC LAN port.
VGA Port
A video (VGA) port is located on the I/O back panel. Refer to the board layout below for the
location.
Universal Serial Bus (USB) Ports
There are two USB 2.0 ports (USB0/1) and two USB 3.2 Gen 1 ports (USB3/4) on the I/O
panel. The motherboard also has one USB 2.0 TypeA header (USB2) and two USB 3.2 Gen
1 headers (USB5/6). The onboard headers can be used to provide front side USB access
with a cable (not included).
Back Panel USB 0/1 (2.0)
Pin Definitions
Pin# Definition Pin#
1 +5 V 5
2 USB_N 6
3 USB_P 7
4 Ground 8
COM Port
Pin Definitions
Pin# Definition Pin#
1 DCD 6
2 RXD 7
3 TXD 8
4 DTR 9
5 Ground 10
Definition
+5 V
USB_N
USB_P
Ground
67
Chapter 4: Motherboard Connections
Definition
DSR
RTS
CTS
RI
N/A
Front Panel USB4/5 (3.2 Gen 1) Header
Pin Definitions
Pin# Definition Pin#
1 VBUS 11
2 IntA_P1_SSRX- 12
3 IntA_P1_SSRX+ 13
4 GND 14
5 IntA_P1_SSTX- 15
6 IntA_P1_SSTX+ 16
7 GND 17
8 IntA_P1_D- 18
9 IntA_P1_D+ 19
10 ID
Definition
IntA_P2_D+
IntA_P2_D-
GND
IntA_P2_SSTX+
IntA_P2_SSTX-
GND
IntA_P2_SSRX+
IntA_P2_SSRX-
VBus