Table of Contents
Advertisement
2.5 Installing the Server to the Rack
Once the outer rails are attached to the rack, the server is ready to be installed into a rack.
Installing the Server into a Rack
1. Confirm that inner and outer rails have been properly installed.
2. Align the server rails with the front of the rack rails.
3. Slide the server rails into the rack rails, keeping the pressure even on both sides (it may
be necessary to depress the locking tabs when inserting). When the server has been
pushed completely into the rack, the locking tabs will "click" into the locked position.
4. Insert and tighten the screws that hold the front of the server to the rack.
Note: The figure above is for illustrative purposes only. Always install servers at the bottom
of the rack first.
Figure 2-3. Installing the Server into a Rack
24
Chapter 2: Server Installation
Advertisement
Table of Contents
Troubleshooting
