Memory; Memory Support - Supermicro A+ AS -2015A-TR User Manual

3.4 Memory

Note: Check the Supermicro website for recommended memory modules.
Important: Exercise extreme care when installing or removing DIMM modules to prevent
any possible damage.

Memory Support

The H13SAE-MF supports up to 128 GB of ECC/Non ECC UDIMM DDR5 5200 MT/s speed,
populated in four DIMM slots. Refer to the table below for additional memory information.
Notes:
•
Always use DDR5 DIMM modules of the same type, size and speed.
•
For memory optimization, use only DIMM modules that have been validated by Supermicro.
•
For the latest memory updates, please refer to our website at
products/motherboard.
•
Please be aware that removing a DDR5 DIMM module at a slanted angle may cause dam-
ages. It is recommend that you lift the module straight up out of the slot.
•
DIMM modules are NOT hot-swappable and be sure to disconnect power for a minimum
of twenty seconds before inserting or removing them.
1 DIMM
2 DIMMs
4 DIMMs
Number of DIMM
Type
Sockets per Channel
SMT UDIMM
Chapter 3: Maintenance and Component Installation
DIMM Population Guide
Type
A1
V
V
Populating DDR5 Memory Modules with
AMD Ryzen 7000 Series Processor
Number of DIMMs
Populated
2
http://www.supermicro.com/
Channel
A2 B1
V
V
V V
Channel 0
SR: 5200 MT/s
1
DR: 5200 MT/s
1 Not Valid
SR: 3600 MT/s
2
DR: 3600 MT/s
32
B2
V
Channel 1
Not Valid
SR: 5200 MT/s
DR: 5200 MT/s
SR: 3600 MT/s
DR: 3600 MT/s