Supermicro SuperServer SYS-111E-FWTR-EU User Manual page 65

Drive LED
The Drive LED connection is located on pins 13 and 14 of JF1. Attach a cable to pin 14 to
show drive activity status. Refer to the table below for pin definitions.
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below
for pin definitions.
NMI Button
The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the
table below for pin definitions.
Chapter 4: Motherboard Connections
Drive LED
Pin Definitions (JF1)
Pins Definition
13 3.3 V Stdby
14 Drive Active
Power LED
Pin Definitions (JF1)
Pins Definition
15 +3.3V Stby
16 PWR LED
NMI Button
Pin Definitions (JF1)
Pins Definition
19 Control
20 Ground
65