Table of Contents
Advertisement
DS-KD8003 Series Module Door Station User Manual
Caution
The password should be 8 to 16 characters.
●
The password should contain at least 2 of the following types: digits, lowercase letters,
●
uppercase letters and special characters.
Do not contain following characters in the password: the user name, 123, admin (case-
●
insensitive), 4 or more continuously increasing or decreasing digits, or 4 or more consecutively
repeated characters.
The password strength of the device can be automatically checked. In order to increase the
●
security of your product, we highly recommend you change the password of your own
choosing. And we recommend you change your password regularly, especially in the high
security system, changing the password monthly or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
service provider and/or end-user.
(If the device supports AP mode, after the admin password is changed, the password of AP
●
hotspot will be changed simultaneously.)
6.5.9 Account Security Settings
You can change the security questions and answers, or the email address for the device. After
change the settings, once you forgot the device password, you should answer the new questions or
use the new email address to reset the device password.
Steps
1. Click Configuration → System → User Management → Account Security Settings .
2. Change the security questions or email address according your actual needs.
3. Enter the device password and click OK to confirm changing.
6.5.10 View Device Arming/Disarming Information
View device arming type and arming IP address.
Go to Configuration → User Management → Arming/Disarming Information .
You can view the device arming/disarming information. Click Refresh to refresh the page.
6.5.11 Network Settings
TCP/IP Settings
TCP/IP settings must be properly configured before you operate the device over network. The
device supports IPv4.
81
Advertisement
Table of Contents
