HIKVISION DS-KD8003 Series User Manual page 39

DS-KD8003 Series Module Door Station User Manual
Steps
1. Paste the installation Sticker 1 onto the wall. Make sure the sticker is placed horizontally via
measuring with the gradienter.
2. Drill 4 holes according to the screw holes on the sticker. The suggested size of hole is 6
(diameter) × 25 (depth) mm. The suggested length of cables left outside is 270 mm.
3. Remove the sticker and insert the expansion sleeves into the screw holes.
4. Fix the mounting frame onto the wall with 4 expansion bolts.
5. Thread the module-connecting line across the thread hole of the frame. Pass the main unit
connecting lines across the thread hole to the upper grid.
Figure 4-15 Drill Screw Holes
Figure 4-16 Fix the Mounting Frame
31