HIKVISION DS-KD8003 Series User Manual page 44

DS-KD8003 Series Module Door Station User Manual
Note
The suggested dimension of installation hole is 220 (W) × 108 (H) × 45.5 (D) mm.
●
The suggested length of cables left outside is 270 mm.
●
2. Select a cable entry and remove the plastic sheet.
3. Mark the gang box screw holes on the hole.
1) Routs the cables through the gang box hole.
2) Insert the gang box into the installation hole.
3) Mark the gang box screw holes' position with a marker, and take out the gang box.
Figure 4-22 Drill the Installation Hole
36